Linebacker® 4 Channel General Purpose "Y" Connector Cable & Hose Protector
The Linebacker® "Y" connector is ideal for splitting out cable runs in factories or between site equipment. It provides safe accommodation for cables and hoses up to 3" in diameter. It is ideal for use in areas where heavier traffic is present, and capable of protecting cables from loads up to 20,200 lb. per axle.
- Easy To Transport - Each section is compact enough that it can be easily lifted by a worker, and stacked away easily.
- Interlocking Design - With each section locking into the next using Checkers patented T-Connector you can make any run as long as needed.
- All Weather Construction - The UV stabilised Polyurethane construction means that the Linebacker® can be used in all seasons and almost all environments. It is also abrasion, impact and chemical resistant.
- Lift Cables without Dismantling the run - The reinforced hinged lid means that cables can be lifted and removed or replaced without taking the run of protection apart.
Within the Linebacker® general manufacturing 4 channel range there are plenty of accessories including 90° cross overs as well as end caps to locate at the end of runs to ensure cables enter and exit without chafing, for more information on the Linebacker® range see here.
Have questions about cable protection products?
Give our sales team a call toll free at (800) 671-9662, our experienced staff will help you choose the best product for your needs.
Customers Who Viewed This Page Also Viewed
|A: Length||24 in. (60.96 cm)|
|B: Width||24 in. (60.96 cm)|
|C: Height||3.875 in. (9.84 cm)|
|D: Channel Width||3 in. (7.62 cm)|
|E: Channel Height||3 in. (7.62 cm)|
|Per Tire||10,100 lb./Tire (4,581 kg) (Max load tested at 70°F (21°C)|
|Per Axle||20,200 lb./Axle (9,163 kg) (Max load tested at 70°F (21°C)|
|Cable & Hose Diameter (Max)||3"|
|Weight||31.85 lb. (14.4 kg)|
Q & A
Be the first to ask a question.